|
|
Apartment house
Havlíček, Jakub ; Vacenovská, Veronika (referee) ; Utíkalová, Ivana (advisor)
This bachelor thesis deals with the project of two apartment blocks “A” and “B” in the village Rudíkov. These two objects are located in sloping terrain and both have two floors aboveground and one floor underground. In the apartment block “A” there are six apartment units aboveground and four garage units and storage area underground. In the apartment block “B” there are eight apartment units aboveground and two wheelchair accessible apartments with common storage areas underground. The objects are designed from a construction system made of ceramic blocks. The ceilings are monolithic and the roof is hipped with trusses. The thesis provides documentation for realization of the construction.
|
|
|
House with establishment
Podola, Michal ; Blahová, Pavla (referee) ; Čuprová, Danuše (advisor)
The project sloves a new family house with an establishment in a quiet location on the edge of the village Chomýž. The purpose of building is providing basic snacks for tourists and cyclists. The establishment offers indoor and outdoor seating. The house is situated in a slightly steep land near the local trails. It is a three-storey detached building with two floors. The Construction system consists of masonry Porotherm, further insulated system Baumit Open and horizontal structures Miako, also Porotherm. The roof is a part of nailed trusses with a angle of 12°. Above the building there is a single casting flat roof.
|
|
|
Detached House with Winery
Hlavinková, Veronika ; Šibal, Jan (referee) ; Králová, Zuzana (advisor)
This bachelor thesis is focused on a design documentation of a detached house with winery within a cadastre unit of Litovel city. This is a three storey freestanding house with a layout for a family of four. The winery is located in a basement, residential area is located on the first and second floor. A structural system of an object is designed from POROTHERM with an exterior insulation system 120 mm wide. Vertical peripheral supporting structures of the 1st and the 2nd floor will be bricked up with Porotherm 50 eko+ and the basement from a permanent formwork ŽB 25. Interior bearing walls are made of Porotherm 30 profi and non-bearing walls are made of Porotherm 11,5 Aku, except the 2nd floor – these are made of plasterboards Rigips 150 mm wide. Outer coat is silicate, grooved of 2 mm, light brown color. A staircase is designed as cast-in-place reinforced concrete. A ceiling construction is made of keramo beton systém Porotherm (beams Pot and Miako inserts) 250 mm wide. There is a cast-in-place reinforced concrete ceiling over a garage, 150 mm wide. A roof is designed as a roof truss with a clay tile roofing Tondach Hranice11, Amadeus black color. Doors and windows are designed as plastic, mahogany color, a sectional garage door is also mahogany. Floor coverings are designed according to functioning of different rooms – tiles or laminate flooring. The main purpose of my bachelor thesis is to figure out a space arrangement, a suitable construction systém, structural system and a design of drawings including text documentation. This bachelor thesis is in a shape of a design documentation for building execution.
|
|
|
Guest House "Na Pasekach"
Musílková, Julie ; Janíček, Vít (referee) ; Králová, Zuzana (advisor)
This bachelor´s thesis deals with the project of a guest house, which is located in the area of Žďárské Vrchy. The concerned building stays on its own in a gently sloped down terrain. The whole building is constructed in a barrier-free way and is primarily intended to be used for recreation as well as housing capacity including eating facilities. The aforementioned premises are build on a rectangular groundplan with architectonic features of a log farmer´s house with agricultural buildings inside of the inbuild yard. There is a restaurant in the ground floor, furthermore room for social activities, terace, hall, reception, kachen, store house, bathroom and premises for employees. Attic apartments are constructed in the way that allows different sizes of the rooms. This range varies from two bed up to four bed rooms with a maximum capacity of 18 people including private bathrooms; and also small flat for the keeper of the premises. The building is designed with a wall-bearing system based on fundamental isolating special shaped bricks wasted in boarding of a plinth of fundamentals TERMO, formed from a concrete of a type C16/20. The vertical bearing-constructions are bricked from Porotherm 44 PROFI, Porotherm 36,5 PROFI on a mortar and light construction of a type of wooden house. The ceiling construction is made of prestressed concrete floor slab Spiroll Goldbeck. Half-Hipped Roof is made of wooden roof truss and is covered with special roofing material EUREKO DDS II in the shade of black. Facade is partly made of wooden facing, and partly plastered with facade plastering BAUMIT. Windows and entrance doors are wooden. For parking there are 18 spots available, out of which 2 are reserved for people with disabilities.
|
|
|
Pension with hippotherapy
Zdražilová, Barbora ; Kašpárek, Stanislav (referee) ; Utíkalová, Ivana (advisor)
The subject of the diplom work was to prepare a detailed project documentation of the penzion with hippotherapy in Veseli nad Moravou. This is a document processing house with two floors and the building stables. The object of the pension are located accommodation rooms, dining room and especially apartment manager. The building is located 12 stables are housed boxes, feed stores and higienické facilities for guests.
|
|
|
Detached house
Marková, Lucie ; Rybaková, Anna (referee) ; Utíkalová, Ivana (advisor)
The bachelor thesis deals with the project of a new detached house in Svitavy. The house is a two-storey building with shed roofs including a garage for two cars. The floor plan is composed of three rectangles adjacent to each other. The loadbearing walls are made of ceramic blocks Porotherm with inserted mineral wool. The building stands on the foundations of concrete. The ceiling above the first floor is made of reinforced concrete, the second floor has a ceiling made of truss structure of the roof. There are panels of aluminium sheets used for roofing.
|
|
|
Christian Center Elijah
Koloničný, Libor ; Burianová, Lenka (referee) ; Smolka, Radim (advisor)
The aim of this master thesis is to prepare the project documentation for a building of a Christian centre. The building is designed for liturgical purposes, but also leisure activities and consists of two floors and a partial basement. The main parts of the building: Main hall for worship services, group of rooms for activities, small hall, tea room and a dwelling unit for the pastor. The floor plan of the building is shaped like the letter „V“, and the architectural design of the building does not interfere with the landscape. The building is set in slightly sloping terrain which forms a contrast with the opposite rising flat roof over the main hall.
|
|
|
Detached house with florist
Pobucká, Slávka ; Bureš, Jan (referee) ; Kacálek, Petr (advisor)
The aim of this bachelor thesis is a design of new building detached house with florist. Construction is situated in the village of Hutisko – Solanec in the Vsetín district. The building is a detached house, it has two floor and a partial basement. The detached house is designed for permanent housing for a four member family The floor plan of the building is of an irregular shape, based on the shape of the land parcel. The house roofing is designed with a gable roof. The construction is based on plain concrete strip foundations. The vertical load-bearing structures are designed to be bulit of clay blocks Heluz and concrete blocks of permanent formwork. The load-bearing roof assembly is built of timber roof truss and prefabricated timber truss girders. The building is divided into a living area and florist.
|
|
|
A family house with an establishment
Popelka, Michal ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
This bachelor thesis is focused on design of family house with an establishment serving as financial consultancy. The object is located in cadastral area of Strání and has a partial basement with two above-ground floors. The house is established for four member family. External walls of the basement are bulit of permanent formwork. External walls of above-ground walls are bulit of clay blocks Porotherm 30 Profi with contact thermal insulation system ETICS. Horizontal load-bearing structures are formed by prefabricated rib-and-filler floor system MIAKO. Staircase is designed as two times bent slab. Part of the object is roofed with a warm flat roof, the other part with roof truss with roof slope of 35°.
|
|
|
Static analysis of the roof structure
Meissnerová, Sabina ; Hokeš, Filip (referee) ; Vlk, Zbyněk (advisor)
This bachelor thesis deals with analysis of roof of a nursery school and comparing few calculation models. Model was created according to provided foundations in program Dlubal RFEM 6.01. The load of the contruction was created due to valid norms. Created models were evaluate to limit state of load capacity, where the results were compared with manual calculation and on limit state of usability.
|
guest ::
